Charm Combination IP/MCP Thumb Splint

All metals we use are 100% lead and nickel free hypoallergenic pure metals so they will not tarnish, rust, or lose their color and oxidize the skin. You can read about the variety of metal choices we offer below!*

Nickel Free Stainless Steel- We only use high quality 430 stainless steel that is certified to be nickel free from the manufacturer. This type of steel has a slightly higher level of chromium than other types of stainless steel instead of the nickel that would typically be alloyed in. It has good corrosion resistance so will not pit, rust, or oxidize.

Sterling Silver- Sterling silver is an alloy of 92.5% fine silver and 7.5% copper. The copper is necessary to strengthen the metal, as fine silver by itself is far too soft to be used in any jewelry application. While it's very rare, some people can react with the copper content and find their fingers oxidized. Sterling silver will be kept shiny by the natural oils in your skin from wearing it, but if it has been put away for a while may tarnish. If this happens, a simple jewelry cleaning cloth will remove the tarnish.

Titanium- We use 99.9% pure Grade 2 titanium. This grade of titanium is softer that Grade 1 so that it can be hand worked into splints. Titanium is extremely lightweight and is an excellent option for those with sensory issues. Titanium is also the best choice for those with MCAS or severe metal allergies due to its hypoallergenic nature. It is very rare for titanium to cause a reaction.

14k Gold Fill- We offer 14k Yellow and Rose gold filled options. Gold filled is similar to gold plated, but with a much thicker coating of 14k gold over a brass or copper core. This gives assurance that the gold will wear well, without flaking or peeling off like plated and having a more reasonable price than solid gold.

 

*Please note that different metals have different tensile strengths so to ensure each splint has adequate and proper support not all sizes will be available in all materials.

Using your preferred sizing method measure right around the thumb IP joint following the blue line on the left side of the last picture, as this is where the splint will sit.

You will then need to find the length ot the gap between the IP joint and MCP joint. This measurement should be taken with the thumb bent as in the picture, on the inner side of the thumb following the blue line. This measurement is usually about 1.5cm.

Full sizing instructions with pictures, charts, and a free printable ring sizer are available on our sizing page.

As all items are custom handmade to order processing time varies depending on order size, materials, and complexity. Please see the Shipping & Policies page for information on processing times.

Domestic shipping starts at $9.95 and takes 3-7 business days in transit. 

International shipping starts at $30 and typically takes 5-10 days in transit